LAB.GRUPPEN introduces the new PLM+ series of amplifiers

At PL+S, TC Group introduced the new PLM+ series made up of PLM 12K44 eandPLM 20K44 speakers.

PLM 12K44 is a TD class high-power speaker that exploits the efficiency of the D class and the audio quality of the AB class, with [email protected], [email protected],67ohm, [email protected], [email protected] and [email protected] power ratings.

Lab.Gruppen PL+S 2015

RPM (Rational Power Management) proprietary technology enables to optimize the distribution of total power over four channels with limit of 5900W for each single channel. Yield can be adjusted from +22dB to +44dB in 0.1dB steps, and has 4 electronic balanced analogical inputs with ISOflot technology on XLR3 connector, 4 AES/EBU inputs on XLR3F connector, 8 inputs and outputs on Dante protocol, speaker outputs on two SpeakON NLT4 connectors or on single NLT8 connector.
Moreover, the double Ethernet redundant connection enables control and monitoring via Lake Controller software or with third-party devices by means of DLM (Direct Lake Messaging) protocol. Frequency response is from 20 Hz to 20 kHz to +/- 0.05 dB, S/N>114 dBA @8ohm, THD<0.05%.

PLM 20K44, on the other hand, manages power of up to [email protected], [email protected],67ohm, [email protected], [email protected] e [email protected] This is also equipped with ARPM (Rational Power Management) proprietary technology for the optimization of total power distribution over four channels with limits of 5900W for each channel. Yield is adjustable from +22dB to +44dB in 0.1dB steps, and has 4 electronic balanced analogical inputs with ISOflot technology on XLR3 connector, 4 AES/EBU inputs on XLR3F connector, 8 inputs and outputs on Dante protocol, speaker outputs on two SpeakON NLT4 connectors or on single NLT8 connector.
The possibility of deciding how to distribute the power between the channels also enables to optimize space, while transport is managed via Lake Controller software, developed by TC Group.

Lake Controller is another new product presented at PL+S 2015,with the new v6.4 software version, which contains a series of important features for large-scale, faster and more accurate optimization of the speaker systems.

In the video interview, Emanuele Luongo, Product Manager – Prase, shows us the main differences compared to the previous models, also giving us an overview of the new functions of the PLM+ series.

Info: www.prase.it

ZioGiorgio Staff
© 2001 – 2015 NRG30 srl. All rights reserved

Read other news tagged with:
Skip to toolbar